Case Studies

Hilton Hotel Liverpool


Hilton Hotel Liverpool

Location: Liverpool
Specification: Permatec Hot Melt
Approx. Area: 3000m2
Description:

The main roof area and the side ballroom roof, 3000m2 in total, were waterproofed with Permatec Hot Melt system with an extruded insulation MK layer paved walkways and 20/40 gravel ballast to the remaining areas. The Plant room roof 500M2 1.8 Sarnafil Light Grey mech fixed to metal deck and insulation Level 8 a secret gutter was waterproofed by Hyflex using Exemplar liquid applied waterprrofing,above the gutter marine ply was installed to joists to create as balcony which was subsequently waterproofed by Hyflex again using Exemplar BW system.




Derby Hospital, East Midlands


Derby Hospital, East Midlands

Location: Derby, East Midlands
Specification: Hot melt, Single Ply & Standing Seam
Approx. Area: 15000m2
Description:

Continuing BriggsAmasco's increasing Public Health portfolio here we see an inverted holt melt roof, insulation and ballast with slab walkways to the perimeters on the prestigous Derby City Hospital project carried out for Skanska. The Hot Melt area was approximately 7550m2.
The project also included 5500m2 of Kalzip standing seam and 2000m2 of Sarnafil single ply roofing.




Knightsbridge


Knightsbridge

Location: Knightsbridge
Specification: Hot Melt
Approx. Area: 7000m2
Description:

199 KnightsBridge is a highly prestigious residential development in London. An extremely complex project comprising two blocks of apartments, a row of terraced houses, a large podium with a water feature, access levels and a series of private balconies with bespoke paving. The bespoke paving was made to measure for each individual balcony.